6 months, 1 week ago dainovaParticipant
I needed to disassemble my mama’s Titan X23 for easy transportation, and I could not disconnect that harness at the base, despite my MS ). I was afraid to use any force or tools. I checked this harness carefully like on photo, looks like I need push in that tab in center, but it still doesn’t work and I dont feel any play there.
Or move that grey ring up a little like arrows suggest?? I tried this too.
Titan gurus!!!! please help !!!!
Manual doesn’t say anything too. Then I plan to lift lever on the right and lift seat out, hope this is the way to go.
5 months, 4 weeks ago Andrew FataloKeymaster
- This topic was modified 6 months, 1 week ago by dainova.
You would be 100 percent correct with all you have stated in this. Often times there can be substances that leak down the joystick wire from drinks or human fluids or other outside elements.
You will want to slide the gray part of the harness then pull to disconnect it. If it is having issues coming off, try a little rubbing alcohol or let sit with some WD-40 to break away any substances.
If the connector was forced together by putting it upside down, then you may have to figure out other means of gripping the connector to separate them.
Once you have the connector loose you can take the seat right off.
You must be logged in to reply to this topic.