-
At the beginning I could overcome the 8 code by putting the scooter in neutral moving forward or backward then putting it back into gear, although this would work temporarily I noticed that while moving forward there was an intermittent drag. When that method quit working I could moves the battery cable (Pos/Neg on the left side) and that would defeat the 8 code. Since there was significant corrosion near one of the fuses(?) on that cable I removed it and removed the corrosion. I am now stumped, since I am not schooled in the 8 code symptom I am asking for ideas what to do next.
If you have corrosion that is visible, you probably have even more corrosion in areas that are not visible. Once corrosion starts, its keeps traveling under wire sleeves, you need to re-wire your scooter or take it to a tech to give it a proper evaluation.
You must be logged in to reply to this topic.