-
I have an older pride maxima but it is in good condition and running when it was last used. It has sat for about a year. It won’t turn on with the key. It also does not show it is charging. I checked both batteries and both read 13.50 volts. I am thinking water may have gotten into the off/on switch causing it to fail. I checked the reset button and it is fine.
I am looking for a wiring diagram if anyone has one or can tell me where I can get one so I can trace the circuits.
Thanks in advanceDid you check the voltage on the charging port? If it’s not ready 24+ volts, your battery wiring is wrong. You may also check the ignition voltage to ensure you are getting 24 volts there too.
By the way, most of the time if you leave your batteries connected for a year, the batteries will not work after you go to use them again. The batteries might need a load test.
By the way, most of the time if you leave your batteries connected for a year, the batteries will not work after you go to use them again. The batteries might need a load test.
You must be logged in to reply to this topic.