Ever wondered how to use the Bluetooth Module on the Golden Eagle HD? We’ll discuss in this article how the Bluetooth Module works.

The Bluetooth Module can be found beside the keyhole as a part of the tiller assembly.

Let’s start with connecting to the Bluetooth of your Golden Eagle HD.

The Bluetooth connection is automatically on once you’ve turned on your Golden Eagle HD.
1. Open Bluetooth on your Phone.
2. Search and find equipment named “Golden”.
3. Select “Golden” to connect your phone. Now you can use your phone and play music.

The three buttons that you see there are as follows (from left to right): Previous button, Pause/Play button, Next button

Next, the USB charging port is only intended to be used with appropriate smart devices such as phones or tablets. Please refer to the device manufacturer’s charging requirements before using. Which means that it’s only meant for charging.

Lastly, the TF that you see beside the USB charging port stands for Transflash or basically, the MicroSD card slot where you can insert your MicroSD card with music on it. You should be able to insert it by pressing it down and remove it by pressing it down gently again so that the mechanism will push the MicroSD card out. But in case it gets stuck, you can push it out by poking the tiny hole beside the Previous button. Here’s a closer look at the Bluetooth Module: