If your Pride Mobility Go-Go Scooter is beeping 9 times, this is an article that can help you out. There are possible things that can cause the 9 beeps and here are the things you should know. A 9 beep on your Pride Go-Go Scooter can be:

1. A possible controller trip.
2. Trying to install the battery with the key inserted
3. The motor controller may be in overheating protective mode.
4. Low voltage

If it’s the first 3 problems mentioned above, you can try:

1. Try reinserting the key into the key switch.
2. Try shutting down your scooter for 10 minutes. This will allow the controller to cool.

If it is a low voltage, check the battery voltage to make sure it has at least 25 volts. Anything under 25 volts could result in the controller acting unusually and sometimes beeping nine times. The video below can help you check your batteries: